When your garage door opener remote acts up it does not end of the world. Before instantly buying a new remote control, why don’t you try a super simple way to repair the remote control. You can start the repairing project by replacing the batteries. The remote control is used almost every day and it is a battery powered, so make sure you replace the old batteries and replace it with a new one and you can test to operate the garage door again.
If your garage door opener still does not want to operate, you can try to reprogram the remote. How to reprogram Genie garage door opener remote is super simple too. One thing that you should remember, when you need to reprogram a remote control meanwhile you have several remotes you need to reprogram all the remote because all the memories stored at opener is erased during the process.
How to reprogram Genie garage door opener remote project does not need special tools. Just get the ladder to help you reach the opener head and the remote control/remote controls to be reprogrammed. You can start climbing the ladder and reach the opener head. You need to locate the learn button or PROGRAM button and the indicator LED light. Press and hold the learn button for about 10 seconds or until you see the indicator LED turns on and immediately turns off. You have successfully erased all the memory from the remote/remotes stored in the receiver on the opener.
After that you can press and release the learn button again. The indicator LED is blinking rapidly. How to reprogram Genie garage door opener remote proceed to press and release the remote button you want to learn to opener. The indicator LED will stay on and stop blinking. To store the memory on the remote to the opener, press and release again the button you have chosen to be learned. For additional remote repeat the above instruction and program the remote individually.