Genie accessories are including keypad, remote and wall button. Genie keypad is mounted outside the garage door to give access to any member of the family or any authorized people who does not have the access of remote control. As long as any member of the family or authorized people, remember the secret PIN to open the door, they can control the garage door opener through keypad for Genie garage door opener.
You need to perform the programming Genie keypad before mounting it outside the garage door. The first thing that you should do in programming the wireless keypad Genie garage door opener is preparing the keypad to work with all Genie Intellicode openers.
Preparing the keypad for single door usage starts by opening the keypad cover and press the number 3-5-7 in order and then press the up/down arrow key button. The keypad light is on and then press and hold still the program key button. Do not release the button until LED color changes from green to red. After that, you can release the keypad for Genie garage door opener and let the light of keypad goes off.
Next step, you can set a secret PIN for your keypad to open the garage door. Open the keypad cover, press the number 3-5-7 in order and press the program key button. Enter the secret PIN of yours, the PIN is the combination of 3 up to 8 digits of numbers. Press the program key to store the PIN.
Programming wireless keypad for Genie garage door opener start by pressing and holding the program key for about two seconds. The indicator round LED on the opener is turning blue and goes off while the long LED is flashing purple. Press the Learn Code button, the LED on the opener is blinking. Enter the 8 digits of PIN and press the up/down arrow button. LED on the opener stays lit. Press the up/down arrow key button. LED on the opener goes off. Pressing again the up/down arrow key button and the door runs.