Every Genie accessory is made easy to program, install and adjust. With the experience of more than a half century, Genie Company concerns about the easiness to utilize the accessories to please the customer, including how simple it is to program Genie remote. When a customer asks how do I program my Genie garage door opener remote, she/he can refer to the owner’s manual that comes with the remote or the opener.
If you do not have a manual to program your remote, you could stop to ask how do I program my Genie garage door opener remote and read the following instruction to program the remote for most models of Genie garage door opener.
These simple steps are the basic instructions to program Genie remote that applied to most Genie garage door opener models:
- First of all, you need to locate the “Learn Code” button and LED indicator light. Both of the items are typically located on the motor unit and near the antenna.
- Second of all, press and release the “Learn Code” button. LED indicator light will flash approximately twice per second. Get your remote control and press the button that you want to program to the opener and stick with the same button until the rest of the programming. After you release the remote button, LED indicator in most models will stay lit, solid. Press again the remote button;the LED indicator will go out.
- To check whether the button on the remote is correctly programmed or not, you can press the remote button again. If the remote is correctly programmed, the door should operate instantly. If the door does not operate, you need to repeat the steps of how do I program my Genie garage door opener remote for most Genie opener models for once again. Make sure this time you are programming the remote within the frequency range of your Genie garage door opener.