Genie is one of the reputable garage door manufacturers that dominate the market of garage door opener. Genie provides lots of kinds of opener as well as the accessories. One of the accessories made by Genie is Genie Pro Screw Drive pad, this pad is compatible with Genie most Genie Intellicode garage door openers models. The pad is one of the access entry devices that control the opener and will be mounted outside the garage to give access to enter the garage for anyone of the family or relatives with access code. You can also use this to replace the lost or broken remote for temporarily.
Anyhow, when you do not have a remote with you meanwhile your pad is malfunctioning, all your option left is to reprogram the Genie Pro Screw Drive pad. To begin the reprogramming, you need to reset the Genie pad into the factory setting. First of all, you need to open the pad cover half way and push the * and PROG button simultaneously. While one hand push the two buttons, the other hands of yours, need to open the rest of the pad cover into completely open position. An indicator light of the pad will be blinking and go off afterwards, please close the cover pad immediately.
To proceed the process of the reprogramming Genie Pro Screw Drive pad, you need to completely open the cover pad. The indicator light will blink and go off, after you see the indicator light is off within 30 seconds proceed the process by pressing the 3-5-7 buttons and PROG button in sequence. If you can access the programming mode, the light indicator is blinking once per second.
Enter the desired PIN that you have selected before and press the PROG button to confirm the PIN of yours, The process of reprogramming is complete when you close the cover pad. Please program the pad to the opener by following the required instruction.