C. G. Johnson is the name behind the Overhead Company establishment. It is said that in 1921 C. G. Johnson invented the upward-lifting garage door and up until now the company still provides service related to the garage door industry. Besides the garage door opener, the company also produces the accessories. Overhead door remote is one of the accessories produced by the company.
The Overhead Company has produced so many kinds of garage opener remotes that will compatible to be used with the garage door opener made by the Overhead Company, and the new 3-button Overhead Door Master Remote is one of Overhead door remote products that considered as the best remote. This master remote has three buttons that large enough and comfortable enough when you need to push it during programming process or when you want to control the opener. The remote works at 315 MHZ and 390 MHZ frequency that will automatically find the opener with the same frequency and it will work no matter any nearby interference exists. You will hardly find any programming issues when performing the remote programming to all Overhead Door garage door openers made from 1993 up to present. You can program this remote with all codes and it is included CodeDodger.
Overhead door remote programming is quite simple, the first step you need to press and hold the PROGRAM SET button for about 5 seconds on the opener. You will see both blue long and small LEDs is illuminating. After that you may release the button and the small blue LED is on. Press and release the PROGRAM SET button, you will see the long purple LED is flashing. Press and release the remote button you want to program to the opener, the long purple LED will stay on. Press and release the remote button you chose, the small and long LEDs will flash blue and immediately go off. To store the memory to the opener, you need to press and release the remote button once again. The programming process is complete.