Genie is one of the reputable manufacturers in the market. Genie provides Intellicode technology for any openers produced. The Intellicode system will roll code automatically every time the garage door is activated to open or close. To activate the Genie Intellicode garage door opener system you need to program it first to access device such as a keypad.
To perform the keypad programming for Genie Intellicode garage door opener, first of all you need open the cover of the keypad completely and wait for the indicator light to illuminate and blink once. After that, press the 3-5-7 key buttons in order on the keypad. Proceeds the instruction by pressing and holding the PROG button until the indicator light is blinking once. Enter your PIN that you have selected from 3 up to 8 digits of numbers, and press the PROG again. Close the cover of the keypad to complete the programming.
Under the keypad cover there is a learn code button, press the button and do not release it until the LED light is blinking. Open the cover of the keypad and enter the previous PIN you have selected. Press SEND button and release it after you see the garage door is opening or closing. For more than one door opener that you want to control with the keypad, you need to program to opener by first opening the cover of the keypad and enter the PIN. Press the PROG button for about three times. Enter how many doors you want to use, two or three doors. Press the PROG button afterwards and close the cover. Continue the Genie Intellicode garage door opener programming instruction by pressing the Learn code button. Open the keypad cover, enter the PIN and press the SEND button. Press the 1 key button and continues with pressing the SEND button. Do not release the button until the first door you wish to use is opening. For the second and third door you can repeat the process and change the 1 key with 2 or 3 key button.