Genie (Intellicode 2) 3-button remote G3T-BX is remote with 3 buttons that made for the newest line of Genie garage door openers. As you can guess, this remote can control 3 doors just by clicking the desired button in just one compact remote. Work with two frequencies of 390MHZ and 315 MHZ, Genie latest radio control, IntelliCode radio controls, can improve receiver response in the area with interference possibility.
Although this Genie Intellicode garage door opener remote, Genie (Intellicode 2) 3-button remote G3T-BX is deliberately made to operate Genie’s new garage door opener, The new IntelliCode 2, you still can use this compact remote to operate Genie IntelliCode 1 model Genie garage door opener that manufactured from 1998 up to present. You can program pre 2011 model by following the instructions of programming remote control on the manual.
To start the Genie Intellicode garage door opener remote, Genie (Intellicode 2) 3-button remote G3T-BX programming you need to change the default setting to be changed to Intellicode 1. You can detect which default is in as the LED light on the remote displays red for Intellicode 1 or Green for Intellicode 2.
Setting one of Intellicode 2 remote button to be Intellicode 1 is easy, first of all you need to select the remote button you want to set. Remember, the button should not be programmed yet. Press and hold the button for about 10 seconds, you will see that the two RED and GREEN LEDs are on and stay on. Press again the button for two times, this action is meant to toggle Inttelicode from 2 to Intellicode 1. To confirm the action press the same button once more. You will see that the LED is flashing red and that means the process is done and the button on Genie Intellicode garage door opener remote is now set to be Intellicode 1.