Genie Model GIM-3BL is a Series II Mini Transmitter-IC. When you perform how to program garage door opener Genie Model GIM-3BL instruction, please remember that you must use the remote with Series II Electronics only. As other Genie product, the remote can control up to three Intellicode Genie garage door openers produced in 1997 up to present.
To begin how to program garage door opener Genie model GIM-3BL, you need to make sure that the garage door and its surrounding is free from obstruction, children, and unwanted things near the door. To program the receiver first step you have to do is locating the Receiver Learn Code Button and Radio Signal Indicator. Find both button and indicator on the door opener main power head. Once you find the button press and release the Learn Code Button and the indicator of Radio Signal will flash twice per second.
Next, you need to press the Transmitter button within 30 seconds for one time and you will see that the Radio Signal indicator will stay lit. You need to press the transmitter button that previously you have pressed and now the indicator will off as it indicates that Receiver memory is storing the transmitter code.
You need to do the step by step of programming receiver for each Transmitter. The Receiver memory can store up to seven transmitters in a single programming process. Please repeat the instruction of how to program garage door opener Genie Model GIM-3BL for each Transmitter. During the programming if you find the Transmitter Code is not confirmed in 30 seconds and programming stop, please repeat the previous steps. If you find that you are sending a different code Transmitter Code and you see indicator is blinking 4 times per seconds, you need to repeat previous step as the programming is stop.