Genie has produced enormous kinds of garage door openers, parts, accessories to please its customer with good and reliable quality. No wonder the product seems to be one of the favorites to be possessed by people nowadays. The reason why Genie’s products are favorable is because the programming and installing Genie’s products are easy and simple. Remote is one of Genie’s products which are easy to be programmed. Users always are able to make use of Genie’s owner manuals as a reference to program or install.
Programming Genie remote is always simple by following the procedures on the manual
For those who have Genie’s remote, but do not have manuals with them, here are some reference programming Genie garage door opener remote procedures for:
- Genie IntelliG Series Openers Remote. First, go to motor head and find two triangle shaped buttons, one square button and an LED light. Programming Genie garage door opener remote for IntelliG starts by pressing and holding the square button (PROGRAM). You need to hold it still until the long red LED button starts blinking. Now, hold your remote as the LED continues to blink, 4 or 5 feet away and press the button on your remote for three or four or five times. Wait until your garage door is moving and the procedure is finished.
- Genie Digital Remote Transmitter With Internal Set Switches. Programming Genie garage door opener remote for this type is also simple. First, you need to find the receiver. The receiver location is on Genie garage door opener motor head and behind the light lens or restored in external box which is small and has a rectangular shape on the ceiling which is connected to motor head. As you find it, you need to match the settings of internal code setting switches with a set of switches in the receiver on the garage ceiling similarly. You need to remember that the frequency transmitter should be the same frequency of receiver to be properly worked