Genie is one of the biggest garage door opener brands that sells reasonable price with great quality garage door openers. To possess a garage door opener is no longer an option, but it turns to an obligatory. As human depends on the simplicity job offered by garage door opener, users can get frustrated when their Genie Intellicode garage door opener is in action. Instead of replacing the entire garage door opener, it is better to perform Genie Intellicode garage door opener troubleshooting first.
Here are some valuable tips in Genie Intellicode garage door opener troubleshooting:
- Genie Intellicode garage door opener does not run from wall control nor remote control. What you have to do is check the lock switch on the wall console is off. Check the power existence by plugging another appliance into the power outlet and is there is no power just check the circuit breaker. If the power exists, check all connections at the power head terminals and ensure the motor protector is closed.
- Genie Intellicode garage door opener can close, but cannot open. Check the open limit switch for a free movement and good wiring. Check the open force adjustment and make sure the springs in good condition. Make sure the wall console’s vacation lock switch is off. If you find the problem is the opposite, the door will only run open you need to check the Safe-T-Beam system. Make sure the close limit switch is in its free movement and good wiring, check close force adjustment to ensure everything is in good condition.
- The door is open or close by itself as if somebody is running it. The tips of Genie Intellicode garage door opener troubleshooting for this problem is, it may due to stolen or lost remote. If that is your problem, you need to immediately erase all remote control codes from the receiver memory. Once you have all codes erased, you need to reprogram the new remote. Check also for the cutting insulation and shorting wires on the wire of the power head connecting to wall control. If there is a cut wire, replace it as soon as possible.
Do you find the door will only run open but not close? You need to check the Safe-T-Beam system.