How To Program A Genie Garage Door Opener With Wireless Keypad Model GPWK-12, GWK

How To Program A Genie Garage Door Opener with Wireless Keypad Model GPWK-12, GWK

There will be no more pleasurable when the rainy day comes you don’t have to get soaking wet just to open the garage door since you have garage door opener. All you just to do is clicking the button from the car and lets your genie garage door opener do the magic. Genie is well known for its quality of making garage door opener for many years and how to do the program of the garage door is just a child’s play especially how to program a genie garage door opener with wireless keypad model GPWK-12, GWK.

There are things to be remembered of how to program a genie door opener for wireless keypad model such as this type garage door opener is not compatible with transmitter of genie intellicode but with transmitter of Genie with 390 MHz frequency. Secondly, this type of garage door opener will work with remote that has nine or even 12 internal code setting switches. Please read the owner manual for the internal code switches and the accompanying chart since the door code is set by it.

how to program a genie garage door opener

Select the PIN of 8 digits number except # and *

The first step of how to program a genie garage door opener with wireless keypad model GPWK-12, GWk opening the cover slide halfway. Press together 8 and # buttons and slide the cover until it is fully open and latch and then release the two buttons. Next is pressing 3,5, 7 and # buttons in sequence. Right after that you may press the 8 digits of your PIN and end it with # button. Your PIN is combination of any numbers except # and “star” key.

Press the door code as mention in accompanying chart and then press the “star” key and to end it you may close the keypad cover by sliding it down. Check whether or not it works by slide the cover keypad up and then enter your PIN, end it with star key.

Incoming search terms:

program genie remote pad model gwk
hit tracker