How To Program Genie Intellicode Garage Door Opener Wireless Keypad

Wireless keypad is one of entry devices manufactured by Genie, the largest brand of garage door opener. The devices are varied, Genie GWKPD-BL New Wireless Keypad with Intellicode is one of it. Intellicode is a sophisticated rolling code system made by Genie. The system will allow the Intellicode opener to choose more than 4.3 billion access code every time the door is engaged. It will secure the garage door and the house also, so unauthorized people cannot break into the garage or getting the access code. Thus, it becomes such prominent thing when you need to program the Genie Intellicode wireless keypad of yours correctly.

How to program Genie Intellicode garage door opener wireless keypad correctly begin by locating the LEARN CODE button. Depending on your keypad model, the LEARN CODE button can be located on the rear panel of power head or under the light bulb cover.

Once you locate the LEARN CODE button, get ready your keypad and it is better not to mount the keypad to the wall before you finish performing how to program Genie Intellicode garage door opener wireless keypad first.

Here is the instruction of how to program Genie Intellicode garage door opener wireless keypad:

Get your Genie Intellicode keypad and open the keypad cover halfway open. You will see some of numbers and keys on the keypad. Press the 8 button and PROG key button together. Do not release the buttons until you open the Genie Intellicode keypad cover completely open. An indicator light on keypad will blink one time, the keypad is ready to be programmed.

How To Program Genie Intellicode Garage Door Opener

Press the numbers of 3-5-7 in order and press PROG button to end it. The indicator light is blinking for two times per second.

Press the numbers of 3-5-7 in order and press PROG button to end it. The indicator light is blinking for two times per second. You can enter your secret PIN the combination up to 8 digits of numbers, and press the PROG button to end it. When you see indicator light blinking two times per second you can close the keypad cover.

Go to power head and press the LEARN CODE button one time, the LEARN CODE indicator light will flash.  Get your keypad and open it fully. Enter your PIN and press SEND button repeatedly until you see your garage door open.

Incoming search terms:

Genie Intellicode Wireless Keypad
hit tracker