When a remote control sends signals to operate the door, a receiver is assigned to receive the message sent by remote control and allow an opener to close or open as the message sent. Any Genie Intellicode devices have the sophisticated rolling code technology, and it applies to Genie Intellicode Receiver ACSR3G remote-controlled. The Intellicode system is designed to increase the security system to replace the conventional security system, which is using a fixed code and easily to be guessed by unauthorized people.
Programming Genie Intellicode garage door opener receiver ACSR3G is not a difficult project. The instruction of this programming project is indeed quiet clear and simple to do. You need to remember when programming any Genie accessories, locating the LEARN or PROGRAM button as well as the indicator light on the opener is necessary.
The first step in programming Genie Intellicode garage door opener receiver ACSR3G, you need to press and release the LEARN code button located on the motor unit of your opener. Once you press the learn code button, an indicator LED light is illuminating and blinking one time per second.
The next step in programming Genie Intellicode garage door opener Receiver ACSR3G, you need to get the remote control you decided to be programmed to the Receiver ACSR3G on the opener. Decide which button on the remote that will be programmed as not all remote is a one-button remote. As you decide which button on the remote to be programmed to the receiver, directly press and release the button and the indicator LED on the opener stays lit solid.
Press the button on the remote again, and the LED indicator will go off. It shows that the motor unit of the opener has been programmed and the remote control is ready to be used anytime. Press the button on the remote control once again to test whether the program is complete and remote can control the opener.